T1 Bosch/R35 MAP/TMAP Adapter

T1 Bosch TMAP to -3 ORB Adaptor

These T1 map sensor adapters will work on the OE R35 MAP sensor bungs or on Bosch TMAP sensor bungs.

These adapters will allow you to convert from the flanged type MAP or TMAP sensor to a -3 ORB fitting. Leaving the output of the bung -3 ORB leaves the flexibility for almost anything.

If you are using a Race Grade sensor that’s 3AN male, it’ll thread directly into the adapter and seal with an o-ring.

If you’re using a Motec sensor that’s 3AN female, you’ll use a 3AN male-male union with an o-ring on each side to couple the sensor to the adapter.

If you’re using a sensor that’s 1/8 NPT male, you’ll use a 3AN male to 1/8 NPT female adapter.

If you want to remote mount your sensor you can adapt to whatever size line you like and go from there.

If you’re replacing a TMAP sensor and need both pressure and temp, use the version with the 1/16 NPT threads in the center and our extended reach glass bead temp sensor.

Each adapter includes a stainless steel M6 mounting bolt and Viton o-ring.

Price is per adaptor